The repair kit with the clutch cylinder cable 519EHA-1707018, installed on the valve block 519EHA-1707010 of the robotic gearbox of the Chery Tiggo FL car, includes: two cuffs for the clutch actuator piston 519EHA-1707018, the mounting sleeve and the clutch cylinder cable, the plastic housing seal and the position sensor itself clutch 513EHA-1707015. A simplified clutch cylinder repair scheme is given at the end of the repair kit description.

A broken cable of the clutch cylinder of the Chery Tiggo FL automatic robotic transmission may be accompanied by the following signs:

1. When the "sun" check on the gearbox lights up on the instrument panel and the corresponding errors P2905 or P0805.

2. Unable to engage first or reverse gear.

The easiest way to remove and install the clutch actuator of the robotic gearbox is through the bottom. To do this, you need to disconnect: 1. The high-pressure tube from the clutch cylinder housing, 2. Unfasten the connector of the clutch position sensor on the cylinder and the plastic sleeve of the cable from the leg of the mechanical part of the gearbox 5. Three bolts of the clutch actuator bracket.